300-420 Exam Dumps Updated | Guaranteed Effective 300-420 ENSLD Exam Preparation

We’ve updated the 300-420 exam dumps with the latest questions and answers, which ensures your success in the Cisco 300-420 ENSLD exam. With it, it is valid for 300-420 ENSLD exam preparation.

Pass4itSure offers you two thoughtful options to smoothly and flexibly access the latest 300-420 exam dumps questions (PDF, VCE) in preparation for the exam. Download 300-420 exam dumps address: https://www.pass4itsure.com/300-420.html

Success in the Cisco 300-420 ENSLD exam can be guaranteed by a Pass4itSure 300-420 exam dumps.

Free 300-420 exam dumps pdf download: https://drive.google.com/file/d/1BXfEC_qQ5qLk2Zs65WLqmtk_XfjbSjpS/view?usp=sharing (Updated on 2022.7)

How do you interpret the Cisco 300-420 exam?

Designing Cisco Enterprise Networks (ENSLD) exam 300-420 tests your knowledge of enterprise design. Include:

  • Advanced addressing and routing solutions
  • Advanced enterprise campus network
  • WAN
  • Security services
  • Network services
  • State Drug Administration

Regarding the basics of the exam, I will not explain them all here, I believe you have seen it on the previous blog. (If not, you can view it from here)

Exam 300-420 Prerequisites: You must first pass the core exam 300-401 ENCOR, and then, after taking exam 300-420 and successfully pass the exam, you obtain CCNP Corporate certification.

CCNP Corporate certification exam:

  • 300-410 ENARSI
  • 300-415 ENSDWI
  • 300-420 ENSLD
  • 300-425 ENWLSD
  • 300-430 ENWLSI
  • 300-435 ENAUTO
  • 300-401 ENCOR

.

What should the Exam 300-420 certification process look like?

Take and pass the 300-401 ENCOR exam

Then take the ENSLD 300-420 exam and pass

Finally, CCNP Enterprise certification will be awarded

Why are 300-420 dumps the best and still valid?

Because it is a very authentic and effective way to prepare for the 300-420 exam at an extremely affordable cost. Our Cisco 300-420 exam dumps are verified. You cannot get these types of 300-420 exam dumps in other sources. Our team has developed these dumps with great care in order to help you pass the exam effectively. Cisco 300 420 exam dumps or PDF and VCE questions will be key to success.

300-420 Free Dumps Question Answers

QUESTION # 1

An architect must address sustained congestion on the access and distribution uplink of network. QoS has already been implemented and optimized, but it is no longer effective in ensuring optimal network performance. Which two solutions should the architect use to improver network performance. (Choose two)

A. Reconfigure QoS based on the IntServ model
B. Utilize random early detection to manage queues
C. Implement higher-speed uplink interfaces
D. Bundle additional uplinks into logical EtherChannels
E. Configure selective packet discard to drop noncritical network traffic.

Correct Answer: BE

QUESTION # 2

An engineer uses Postman and YANG to configure a router with: OSPF process ID 400 network 192.168.128.128/25 enabled for Area 0

Which get-config reply verifies that the model set was designed correctly?

A. Option A
B. Option B
C. Option C
D. Option D

Correct Answer: B

QUESTION # 3

DRAG DROP

Drag and drop the properties from the left onto the Cisco SD-WAN components that perform them on the right.

QUESTION # 4

What is an advantage of designing an out-of-band network management solution?

A. In the event of a production network outage, network devices can still be managed.
B. There is no separation between the production network and the management network.
C. In the event of a production network outage, it can be used as a backup network path.
D. It is less expensive than an in-band management solution

Correct Answer: A

QUESTION # 5

Which PIM mode uses a shared tree only?

A. bidirectional
B. sparse
C. dense
D. source-specific

Correct Answer: A

In bidirectional mode, traffic is routed only along a bidirectional shared tree that is rooted at the rendezvous point (RP) for the group https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imctech-oview.html

QUESTION # 6

A customer requests a VPN solution to connect multiple sites with the company headquarters. All the sites use the same IP subnet. The engineer plans to use VPLS. Which solutions must the engineer include in the design?

A. 802.1Q connectivity on the LAN side of the CE
B. route exchange with the service provider
C. address translation to hide overlapping subnets
D. different VLANs on each site

Correct Answer: A

QUESTION # 7

Which design consideration should be observed when EIGRP is configured on Data Center switches?

A. Perform manual summarization on all Layer 3 interfaces to minimize the size of the routing table.
B. Prevent unnecessary EIGRP neighborships from forming across switch virtual interfaces.
C. Lower EIGRP hello and hold timers to their minimum settings to ensure rapid route reconvergence.
D. Configure multiple EIGRP autonomous systems to segment Data Center services and applications.

Correct Answer: A

QUESTION # 8

An engineer is designing a Layer 3 campus network running EIGRP between the core, aggregation, and access layers. The access layer switches will be connected to the aggregation layer using Layer 3 copper connections. The engineer wants to improve convergence time for access layer switch failures. Which technique must the design include?

A. enabling BFD for EIGRP on the access layer uplinks
B. reducing the EIGRP Hello / Hold timer values
C. EIGRP summarization from core to aggregation layer
D. EIGRP summarization from access to aggregation layer

Correct Answer: A

QUESTION # 9

DRAG DROP
Drag and drop the characteristics from the left onto the YANG models they describe on the right. Not all options are used.

Select and Place:

QUESTION # 10

An engineer is creating a design to enable IPv6 to run on an existing IPv4 IS-IS network. The IPv4 and IPv6 topologies will match exactly, and the engineer plans to use the same IS-IS router levels for each protocol per interface. Which ISIS design is required?

A. multi topology without enabling transition feature
B. multi topology with transition feature enabled
C. single topology without enabling transition feature
D. single topology with transition feature enabled

Correct Answer: B

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_isis/configuration/15-mt/irs-15-mt-book/ip6-route-multiisis.html

QUESTION # 11

An organization is designing a detailed QoS plan that limits bandwidth to specific rates. Which two parameters are supported be the traffic policing feature? (Choose two.)

A. violating
B. marking
C. shaping
D. bursting
E. conforming

Correct Answer: BC

QUESTION # 12

DRAG DROP
Drag and drop the elements from the left onto the YANG models where they and used on the right.
Select and Place:

QUESTION # 13

An engineer is designing a QoS policy that queues excess packets for later transmission. Which mechanism must be included in the design?

A. shaping
B. WRED
C. policing
D. RED

Correct Answer: A

Pass4itSure 300-420 Exam Dumps

_______________________________________________________________________________

Questions: 184 Updated On: Jul 11, 2022

_______________________________________________________________________________

Read 300-420 Real Exam Questions Answers & Analysis Free: https://drive.google.com/file/d/1BXfEC_qQ5qLk2Zs65WLqmtk_XfjbSjpS/view?usp=sharing

The best 300-420 exam preparation is here.