Is there any good advice for learning the Microsoft MD-100 exam

Are there any good suggestions for taking the Microsoft MD-100 exam? Especially where any good MD-100 exam dumps questions or takes the MD-100 practice test? Anything can help, that’s what this blog post is about. Isn’t the MD-100 a common exam? But there is a shortage of good resources. You may find some free or cheap online courses and practice exams online, but are they reliable?

Don’t worry, I’ll tell you here. The best Microsoft MD-100 exam dumps https://www.pass4itsure.com/md-100.html ( MD-100 PDF or MD-100 VCE).
Not only that but also shares the latest real MD-100 exam exercise questions that you can experience first in the decision.

Real Micr-osoft MD-100 exam dumps pdf help you:

free MD-100 PDF share [google drive]

https://drive.google.com/file/d/1UiulIK-lPmtyk66oQ43h7XrChno1dIDx/view?usp=sharing

Good! Microsoft MD-100 exam practice test q1-q15 free:

If you are very satisfied after participating in the above MD-100 test, you can directly get the Pass4itSure MD-100 dump, because the test is only partial, and the complete dumps are in the MD-100 exam dumps.

QUESTION 1 *

You have a computer named Computer1 that runs Windows 10.
You complete a full backup of Computer1 to an external USB drive. You store the USB drive offsite.
You delete several files from your personal Microsoft OneDrive account by using File Explorer, and then you empty the
Recycle Bin on Computer1.
You need to recover the files 60 days after you deleted them in the least amount of time possible.

What should you use?

A. the OneDrive recycle bin
B. the full backup on the external USB drive
C. Recovery in the Settings app

QUESTION 2 *

You have a computer that runs Windows 8.1.
When you attempt to perform an in-place upgrade to Windows 10, the computer fails to start after the first restart.
You need to view the setup logs on the computer.

Which folder contains the logs?

A. \$Windows.~BT\Sources\Panther\
B. \Windows\Logs
C. \Windows\Temp
D. \$Windows.~BT\Inf

QUESTION 3 *

HOTSPOT
You have a computer named Computer1 that runs Windows 10.
On Computer1, you create a VPN connection as shown in the following exhibit.

q3

The corporate network contains a single IP subnet.
Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

q3-2

Correct Answer:

q3-3
QUESTION 4 *

You need to identify the total number of events that have Event ID 63 in the Application event log. You must type the
several identified events into C:\Folder1\FileA.txt.
To complete this task, sign in to the required computer or computers and perform the required action.

The answer is below.

QUESTION 5 *

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.

You manage devices that run Windows 10.
Ten sales users will travel to a location that has limited bandwidth that is expensive. The sales users will be at the
location for three weeks.

You need to prevent all Windows updates from downloading for the duration of the trip. The solution must not prevent
access to email and the Internet.

Solution: From Accounts in the Settings app, you turn off Sync settings.
Does this meet the goal?

QUESTION 6 *

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.

You have two computers named Computer1 and Computer2 that run Windows 10.
You have an Azure Active Directory (Azure AD) user account named [email protected] that is in the local
Administrators group on each computer.

You sign in to Computer1 by using [email protected]
You need to ensure that you can use Event Viewer on Computer1 to connect to the event logs on Computer2.
Solution: On Computer2, you create a Windows Defender Firewall rule that allows eventwr.exe.

Does this meet the goal?

QUESTION 7 *

HOTSPOT
You have a computer named Computer1 that runs Windows 10 and has the users shown in the following table.

q7

You move Folder1 into Folder2.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Hot Area:

q7-2

Hot Area:

q7-3
QUESTION 8 *

You have a computer named Computer1 that runs Windows 10.
On Computer1, you create the local users shown in the following table.

q8

Which three user profiles will persist after each user signs out? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. User1
B. User2
C. User3
D. User4
E. User5

QUESTION 9 *

You have a computer named Computer1 that runs Windows 10.
From Event Viewer on Computer1, you have a task named Action1 that is attached to the following event:

1. Log: System
2. Source: Kernel-General
3. Event ID: 16

You need to modify the settings of Action1.
What should you use?

A. the Settings app
B. Task Scheduler
C. Event Viewer
D. System Configuration

QUESTION 10 *

You have a computer named Computer1 that runs Windows 7. Computer1 has a local user named User1 who has a
customized profile.

On Computer1, you perform a clean installation of Windows 10 without formatting the drives.
You need to migrate the settings of User1 from Windows7 to Windows 10.

Which two actions should you perform? To answer, drag the appropriate actions to the correct targets. Each action may
be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view
content.

NOTE: Each correct selection is worth one point.
Select and Place:

q10
QUESTION 11 *

HOTSPOT
You have four computers that run Windows 10. The computers are configured as shown in the following table.

q11

You need to identify to which computers User1 can sign in and which groups you can add User2.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

q11-2

Correct Answer:

q11-3

Box 1: Computer 1 only.
User1\\’s account was created on Computer1. The account is a local account on Computer1. Therefore, User1 can only
sign in to Computer1.

Box 2: Group5 only.
User2\\’s account was created in the domain. A domain is a security boundary. Therefore, you can only add User2 to
groups in the domain.

QUESTION 12 *

You need to ensure that all the current and future users in the Active Directory domain can establish Remote Desktop
connections to Client1. The solution must use the principle of least privilege.
To complete this task, sign in to the required computer or computers.

QUESTION 13 *

You customize the Start menu on a computer that runs Windows 10 as shown in the following exhibit.

q13

You need to add Remote Desktop Connection to Group1 and remove Group3 from the Start menu.
Which two actions should you perform from the Start menu customizations? Each correct answer presents part of the
solution.

NOTE: Each correct selection is worth one point.

A. Unlock Group1.
B. Remove Command Prompt from Group1.
C. Delete Group3.
D. Add Remote Desktop Connection to Group1.
E. Rename Group3 as Group1.

QUESTION 14 *

Your domain contains named Computer named Computer1 that runs Windows 10. Computer1 does not have a TPM.
You need to be able to encrypt the C drive by using Bitlocker Drive Encryption (BitLocker). The solution must ensure
that the recovery key is stored in Active Directory.

Which two Group Policy settings should you configure? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.

Hot Area:

q14

Correct Answer:

q14-2

References: https://docs.microsoft.com/en-us/windows/security/information-protection/bitlocker/bitlocker-group-policysettings#bkmk-rec1
You have a computer named Computer1 that runs Windows 10.
You are troubleshooting Group Policy objects (GPOs) on Computer1.
You run gpresult /user user1 /v and receive the output shown in the following exhibit.

q14-3
QUESTION 15 *

You have a computer named Computer1 that runs Windows 10. Computer1 is in a workgroup. Computer1 contains the
folders are shown in the following table.

q15

On Computer1, you create the users shown in the following table.

q15-2

User1 encrypts a file named File1.txt that is in a folder named C:\Folder1.
What is the effect of the configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

q15-3
References: https://support.microsoft.com/en-za/help/310316/how-permissions-are-handled-when-you-copy-and-move-files-and-folders

The correct answer is as follows:

Q1: B

References:
https://support.office.com/en-us/article/restore-deleted-files-or-folders-in-onedrive-949ada80-0026-4db3-
a953-c99083e6a84f

Q2: A

References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-setup-log-files-andevent-logs

Q3: See the picture

Q4:

See below.

1. Open Event Viewer.

2. Click the log that you want to filter, then click Filter Current Log from the Action pane or right-click menu. This will open the Filter Current Log dialog box.

3. You can specify a time period if you know approximately when the relevant events occurred. You can specify the event level, choosing between Critical, Warning, Verbose, Error, and Information. If you select none of these, all event levels will be returned. You can\\’t modify which event log is being checked as filters apply only to a single log.

4. You can choose the event sources which have generated the log entries, and search for keywords, users, or
computers. You can also search using specific event IDs.

Reference: https://www.manageengine.com/products/active-directory-audit/kb/how-to/how-to-search-the-eventviewer.html

Q5: B

Q6: B

Reference:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/
cc766438(v=ws.11)?redirectedfrom=MSDN

Q7: See the picture

Q8: ADE

Q9: C

An Event Viewer task is created and modified in Event Viewer.
References: https://www.techrepublic.com/article/how-to-use-custom-views-in-windows-10s-event-viewer/

Q10: See the picture

Q11: See the picture

Q12: See below.

Step 1. Add Remote Desktop Users to the Remote Desktop Users Group.

1. Open Server Manager.
2. From the Tools menu, select Active Directory Users and Computers
3. Double click at your domain on the left and then select Builtin.
4. Open Remote Desktop Users on the right pane.
5. At the Members tab, click Add.
6. Type the AD users that you want to give Remote access to the RDS Server and click OK.
7. After selecting the remote desktop users, click OK again to close the window.


Step 2. Allow the log on through remote desktop Services.

Open Group Policy Editor. To do that:
a. Simultaneously press the Windows + R keys to open the run command box.
b. Type gpedit.MSC and press Enter.
2. In Group Policy Editor navigate to Computer Configuration > Windows Settings > Security Settings > Local Policies >User Rights Assignment.
3. At the right Pane: double click at Allow log on through Remote Desktop Services.
4. Click Add User or Group.
5. Type remote and then click Check Names.
6. Select the Remote Desktop Users and click OK.
7. Click OK at \’Select users, computers…\’ window.
8. Finally, click OK again and close Group Policy Editor.

Reference: https://www.wintips.org/fix-to-sign-in-remotely-you-need-the-right-to-sign-in-through-remote-desktopservices-server-2016/

Q13: AD

A: You have to unlock Group1 before you can make any changes to it.
D: If you drag the Remote Desktop Connection from Group3 to Group1, Group3 will disappear.

Q14: See the picture

Q15: See the picture

Looking for materials to learn the Microsoft MD-100 exam? Does anyone know where to find the material? Come here: https://www.pass4itsure.com/md-100.html MD-100 exam dumps (MD-100 Q&As: 297).

Talk about advice:

Mainly looking for exam practice resources, choosing the right learning material Microsoft MD-100 exam dumps is half the battle! With daily study and diligent practice, the MD-100 exam is successfully passed easily.

Pass4itSure has many years of exam experience, recognized by many people, and worthy of your trust. The exam questions have been correctly verified!